Induction heating equipment heating speed is fast, less carbon oxidation deoxidation because the principle of induction heating at medium frequency is electromagnetic induction, its heat is generated in the workpiece itself. Due to the heating speed of the heating method, so little oxidation, high heating efficiency, good repeatability of the process.
The induction heating equipment has a high degree of automation, which can realize automatic and unmanned operation. Automatic feeding and automatic discharging sorting device are selected, and combined with the special control software of Hongteng, which can realize automatic and unmanned operation.
Induction heating equipment heating uniform, high temperature control precision by choosing a reasonable working frequency, to adjust the appropriate dithermic depth, in order to achieve uniform heating, the core surface temperature difference is small requirements. The temperature control system can realize the precise control of temperature
What is the difference between intermediate frequency furnace and power frequency furnace for induction heating of metal melting equipment?
In the same stirring force and capacity, if the furnace can even input 3 times the power of the industrial frequency furnace. The size of the difference is more than just a word difference in their names.
In other words, the crucible size of the intermediate frequency furnace is only one third of that of the industrial frequency furnace under the same power condition.
In addition, due to the influence of inductor coil current and voltage, the power input of the intermediate frequency furnace is about twice the input power of the industrial frequency furnace, so the average power consumption of the intermediate frequency furnace is much lower than that of the industrial frequency furnace.
Power frequency furnace and intermediate frequency furnace can not only be the difference in power, in the use of experience gap is also very large. If frequency furnace each smelting, can be directly empty the charge.
Advanced dumping type intermediate frequency furnace, easy to use. And the power frequency furnace also needs to leave part of the residual metal liquid for the next furnace melting use, otherwise it needs to use the melt to help it melt.
Under the same production efficiency, IF furnace capacity is small, the floor area is smaller than the power furnace. And because of the small volume of the intermediate frequency furnace, the use of lining material consumption is naturally less than that of the power frequency furnace, indirectly saving the operation cost.
As a new generation of casting equipment, the intermediate frequency furnace is on the basis of the original industrial frequency furnace, in the reliability and utilization of the greater improvement. The intermediate frequency furnace compared with the power frequency furnace, more reliable, and has a higher utilization rate.
Due to the more advanced working principle of the intermediate frequency furnace, the stirring intensity is smaller than that of the industrial frequency furnace, which makes the impact of the metal on the lining smaller and can effectively improve the life of the lining. This is also one of the advantages of the intermediate frequency furnace.
If you need to buy intermediate frequency furnace please consult Luoyang giant electric furnace, we can ask you to provide more services.