After the user purchase induction furnace, there may be some problems.
As the main smelting equipment of the induction furnace in the casting industry, design and manufacturing are the key steps, but after the induction furnace is transported to the user's work site, installation and commissioning are the top priority in the stable operation of the induction furnace.
Luoyang great electric small series induction furnace installation to talk about a little installation experience.
Preparation before installation of induction furnace
First of all, it is necessary to check whether the main components and installation materials of induction furnace are complete according to the installation list of induction furnace, and check their condition.
Defects caused by improper transportation and storage of some components and materials should be repaired to make all equipment, components, corresponding materials and parts intact, so as to ensure the smooth progress of the installation and debugging work in the future.
Secondly, the inspection and acceptance of various civil facilities related to induction furnace, such as checking whether the main size in the plane layout is correct.
Check whether the foundation, trench and embedded parts required for the installation of various electrical equipment and main bus line meet the design requirements, and whether the induction furnace foundation, platform elevation, the deviation of the vertical axis and the horizontal axis, and the position of the anchor screw are within the specified size range; Check whether the construction quality of foundation and platform meets the requirements.
Only after the above preparations are completed, can the furnace be installed.
Installation of induction furnace
Installation of induction furnace shall comply with the requirements of drawings.
First of all, the furnace frame is installed on the basis of induction furnace, and then the tilting furnace cylinder and furnace body are installed. If there is a weighing device, it should be installed in the specified position according to the requirements of the drawings.
The support of the furnace (for the crucible type induction furnace including fixed support and movable support two parts) and the furnace body part, in the process of processing.
Control the thermal deformation caused by welding construction is limited to the specified range of design, only in this way to ensure the smooth progress of the future work.
Luoyang Judian is a professional production of induction furnace manufacturers, we are very experienced. We can also provide you with remote guidance if you need it.
Welcome to pay attention to us and learn more about induction furnace knowledge.